Mixer Best Buying Guide India 2021

Live and Studio Mixers

Studio and live-sound mixers are the systems that are a combination of the signals, and route the audio to where it needs to go. It is the program that you want to use, in order to determine the types and quantity of I/O you need.

For example, in a live sound mixer, and in general, it should be connected to a set of speakers, and a pair of monitor mixes, while the traditional, studio, mixer, it can also require a direct outputs on every channel, as well as a multi-track recording.

The line between studio and live-sound mixers are pretty blurry these days, so it is the best place to start is with the components that are part of an electric mixer.

The Key To The Mixer’s Rules, And The Terms And Conditions

Channels

In simple terms, the greater the number of channels in the mix, the more things you will have to connect it to. Channels (such as most of the mixer, the technology that is available in several different varieties, and can be mono or stereo.

They will have to accept of the mic and/or line-level signals, and, more often than not, is a pre-order for the input to an appropriate level, and is one of the faders to control the channel. Each channel has an eq, aux send, pan controls, but some of the equipment can be as simple as a handful of very low-level channels and the master output.

Buses and coaches

It is the goal of every channel in the mixer, it is also possible to use the signal to one of the coaches. The main output of the mixer is to be connected to the master mix bus, which is fed by the channel fader. Also, each and every one of the aux out jacks (aux send), and is operated by a separate volume control on the channel and connect to the console through its own production.

The Aux jack can be switched on independently of the channel capacity (pre-fader), or to be under the influence of the output fader (post-fader). These special connectors are extremely useful for monitoring, mixing, mixing, recording, mixing, and effects sends. Some of the consoles have there is a specific aux bus to its effects, which can include a built-in effects processor, or to a dedicated return channel.

Groups

Some of the large-and medium-duty trucks are equipped with the grouping (sometimes referred to as the SSC group), it’s a convenient way to manage a large number of channels. In essence, each of the group in the array is the same as that of its own blender, which is located between the channel and the bus stop. The way in which people will work, it’s pretty simple. As you can see, the output of each channel to which you want to play on a bus that was going to be part of a group of the father.

For example, you can have all your drums to a Group of 1, and all of your songs, and that of Group 2. Each group has its own production, as the father of the control, and then on the master bus. This will allow you to fill in the elements of your mix, with some of the other channels, without affecting the relative mix of all the channels in the group.

Mute Groups and Scenes

In addition, the random groups, and are a few of the songs also have a mute button-groups. This allows you to assign individual channels to a single point of control, you can use it to quickly mute or unmute multiple channels at the same time.

This is useful if a portion of the band will be playing a couple of songs, or are you like the sound of the band as a presenter on the floor. For more high-end mixing consoles, and it will let you store more, in a mute scene, already.

These special connectors are extremely useful for monitoring, mixing, mixing, recording, mixing, and effects sends. Some of the consoles have there is a specific aux bus to its effects, which can include a built-in effects processor, or to a dedicated return channel.

Groups

Some of the large-and medium-duty trucks are equipped with the grouping (sometimes referred to as the SSC group), it’s a convenient way to manage a large number of channels. In essence, each of the group in the array is the same as that of its own blender, which is located between the channel and the bus stop. The way in which people will work, it’s pretty simple.

As you can see, the output of each channel to which you want to play on a bus that was going to be part of a group of the father. For example, you can have all your drums to a Group of 1, and all of your songs, and that of Group 2. Each group has its own production, as the father of the control, and then on the master bus. This will allow you to fill in the elements of your mix, with some of the other channels, without affecting the relative mix of all the channels in the group.

Mute Groups and Scenes

In addition, the random groups, and are a few of the songs also have a mute button-groups. This allows you to assign individual channels to a single point of control, you can use it to quickly mute or unmute multiple channels at the same time.

This is useful if a portion of the band will be playing a couple of songs, or are you like the sound of the band as a presenter on the floor. For more high-end mixing consoles, and is going to allow you to hold and mute modes, so you’ll have a variety of configurations, you will be suspended, and the channels for quick recall, this is a great live performance, and the worship of the sound.

The insert points and direct outputs
At the same time, the aux sends are useful for the impact that you want to apply it to multiple channels; for example, the reverb, or delay, channel inserts, and is ideal for adding an outboard processors such as compressors and eqs on each channel.

A channel’s insert point is, most of the time, immediately after the pre-amp in the signal path, and allow for the use of the individual or the send and return jacks, or a single 1/4″ insert jack requires a special insert cable.

In contrast, the direct outputs to send you a copy of the pre-amp signal from the board of directors, so that they are useful for the transfer of the individual flows to an external recorder or audio interface.

Analog and Digital Mixers

Shop for the Analog audio Mixer

Digital Mixers

Shortly after the establishment of the board of directors (the majority of the time, immediately after the first phase, the analog signal into a digital mixer, it is converted to digital data for processing, and routing. Basically, a digital mixer, it is a high-end machine with a lot of AD/DA converters and the one dedicated to the surface, and is connected to it. Digital mixers offer some of the advantages of the analog panels.

For example, the DSP chips are much smaller and much less expensive than their analog counterparts, so you can find digital signage filled with the advanced Eq and dynamics processing, and the effects that can seriously cut down on external devices. With the ability to store and download full installations, but it is also a great benefit to you.

Digital mixers have a tendency to come up with a higher learning curve, and, in many cases, they’re the only.

Leave a Reply

Your email address will not be published. Required fields are marked *